<pre id="dhhdh"><del id="dhhdh"></del></pre>
<ruby id="dhhdh"></ruby>

      <ruby id="dhhdh"><mark id="dhhdh"></mark></ruby><p id="dhhdh"></p><p id="dhhdh"></p>
      欧美成人精品三级网站

      LD series - split type

      2015-01-20 129

      Product Feature

        LD series save installation space split type magnetostrictive displacement sensor, suitable for electronic head installation space has strict with built-in measuring occasions.Product has small installation size, strong anti-interference ability, allowable WenYu wide (40 ° - + 75 °), non-contact measurement, easy replacement, and the advantages of intelligent diagnosis;Used in wind power, engineering machinery, such as high-speed railway demands.

       

      Technical Parameters

       

        Analog Output SSI Output
      Project Name Standard/Parameter Standard/Parameter
      Measurement Range 50-5000mm 50-5000mm
      Output Signal 0~20mA,4~20mA,; 0~10V,-10~+10V  RS 485
      Resolution 16 bit D/A  0.1mm/0.01mm
      Non-linearity <±0.02%F.S. <±0.02%F.S.
      Repeatability <±0.001%F.S. <±0.001%F.S.(min±1 readings)
      Response Frequency 1kHz
      Operating Voltage 24VDC (-15/+20%)
      Working Temp - 40℃~+75℃
      Protective Ability Electronic head part:IP67,Rod par:IP69,Rod pressure:35MPa continuous/70MPa peak
      Way To Install Electronic head part:Four M6X45 screw,dip stick:M18X1.5 standard or pressure-fit

       

      Boundary Dimension

       

      Electronic head part

       

      S type rod

       

      M type rod

       

      C type rod

       

      The circular is commonly used
      OD33 magnet ring OD25.4 magnet ring OD17.4 magnet ring
      thickness of the 8mm thickness of the 8mm thickness of the 8mm

       

      Boundary Dimension

       

      Analog Output Needle Size Line Color Definition SSI Output Needle Size Line Color Definition
      1 grey Output Signal:0-20mA,0-10V 1 grey (-)data
      2 pink Signal earth 2 pink (+) data
      3 yellow (+)communication interface 3 yellow (+) clock
      4 green (-)communication interface 4 green (-) clock
      5 palm +24VDC(±10%) 5 palm +24VDC(±10%)
      6 white A direct current source 6 white A direct current source
            7   throw out of gear

       

      Analog Output Needle Size Line Color Definition Modbus Output Needle Size Line Color Definition
      1 grey Output Signal:4-20mA,0-10V 1 grey A(RS485)
      2 pink Signal earth 2 pink B(RS485)
      3 palm +24VDC(±10%) 3 palm +24VDC(±10%)
      4 white A direct current source 4 white A direct current source